Home / Locations / Brampton
Peel Region · Brampton
Drive-in, flow and narrow aisle racking for Brampton warehouses, planned around your forklifts and signed off before the first pallet goes up.
Warehouse racking Brampton
Success Storage Solutions supplies warehouse racking in Brampton from our office on Mavis Road in Mississauga, just south of the city. We design and supply drive-in, pallet flow, carton flow, double deep and selective racking, including narrow aisle layouts, plus mezzanine platforms. Installation is carried out by our sister company, Success Installations, and we handle racking repairs, PSR and relocations across Brampton.
Most racking problems come down to one of two things: too many pallets for the floor, or pickers walking too far. We walk the building, measure it, and tell you which system fixes the problem you actually have. Racking is all we do, and it has been for over twenty years.
20+
years supplying Ontario warehouses
10M+
sq ft of racking supplied
Made in Ontario
by North American Steel
Twelve
racking systems, new and used
Racking systems
Whether you store full pallets, hand-picked cases, or equipment and spare parts, the right system depends on how many SKUs you carry and how fast they move. Every system below is part of our twelve racking systems, supplied new or used.
Forklifts drive straight into the lane, so there is no aisle between rows. Lanes usually run 3 to 8 pallets deep and work last in, first out, which suits cold storage and bulk or seasonal stock with few SKUs. Need first in, first out? Drive-thru pallet racking loads from one side and unloads from the other.
Narrow aisle layouts are selective racking set with tighter aisles, so more pallet positions fit in the same building. Your lift equipment sets the aisle width, not the racking, so we size every aisle to the trucks you run, including VNA layouts.
Load at the back, pick at the front, and gravity does the rest. Lanes of rollers on a gentle decline give true first in, first out, which matters for food, beverage, pharma and any dated stock.
Cases roll forward to the pick face as stock is taken, packing many SKUs into a short run of pick face. It cuts walking time in high-throughput picking, and often sits under pallet racking or inside a pick module.
Double deep stores two pallets, one behind the other, and typically adds 20 to 30 percent more pallet positions. A standard forklift can’t reach the rear pallet, so you need a double-reach or pantograph truck.
A storage mezzanine platform is a free-standing steel second level built inside the building you already rent. It often doubles usable floor space without moving, and comes with engineer-stamped drawings for the permit.
Push back, cantilever, industrial shelving, rack-supported buildings and rack protection, which matters most in drive-in lanes where forklifts work inside the rack.
Racking services
One team takes your Brampton project from the first measurement to the paperwork that makes it legal to load.
We measure clear height, columns, sprinkler lines and loading doors, then lay the racking out around how your product moves, not around a catalogue page. The site assessment is free, and you get 2D and 3D CAD drawings plus engineer-stamped plans ready for the City of Brampton permit.
Installation is carried out by our sister company, Success Installations, who build everything we supply. Work is phased section by section so your Brampton facility keeps receiving and shipping.
Forklifts hit racking, and a single strike to an upright can cut the safe capacity of an entire row. We inspect damaged racking frame by frame, replace bent uprights and failed components, and issue the PSR and rated capacity signage.
Moving into or out of Brampton, or resetting your floor? We label, dismantle, transport and rebuild in phases so you keep shipping, and buy back racking you no longer need.
Why us
As an executive partner of North American Steel, our racking is made at their plants in Whitby and Colborne. Brampton warehouses deal direct with the people who make it, not an importer or a reseller.
Our office is on Mavis Road in Mississauga, just south of Brampton. Site visits don’t wait for a regional rep, and the people who measure your building are the ones who design it.
Engineer drawings, capacity planning and rated capacity signage come with every job. Where a PSR applies, it’s done before the racking is loaded.
We tell you what your building can actually hold. Sometimes the honest answer is a smaller job than you expected. Our racking is already in operations for Ford, Loblaws, Wayfair and Gay Lea. About us
Areas served
We supply and service warehouses and distribution centres across Brampton, including:
We also cover Caledon, Bolton and the rest of Peel Region, and our home city of Mississauga.
How a project runs
Five stages, and no invoices for work nobody discussed.
01
We come to your Brampton building and measure clear height, columns, sprinklers and doors. The assessment is free.
02
CAD layouts and capacity planning, with aisles sized to your forklifts.
03
A real quote for your building, usually within one business day of your enquiry.
04
Racking made in Ontario, delivered and installed in phases by Success Installations.
05
Engineer documents, PSR where it applies, and rated capacity signage before the first pallet goes up.
FAQ
VNA aisles are sized to the truck that runs them, not to the racking, and are narrower than the 10 to 13 ft typical of standard selective aisles. We set the width from your truck’s specs during layout design.
Narrow aisle racking is selective racking set with tighter aisles, so more pallet positions fit in the same floor area. It is run with reach trucks or other narrow-aisle equipment.
There isn’t one fixed number, because your forklift decides the aisle width, not the racking. Standard selective aisles generally run 10 to 13 ft.
Drive-in racking lets forklifts drive into the lane, so there is no aisle between rows. It stores pallets 3 to 8 deep, last in, first out, for high-volume stock with few SKUs.
Double deep racking stores two pallets, one behind the other, on each side of an aisle. It needs a double-reach or pantograph truck and typically adds 20 to 30 percent more pallet positions.
Free site assessment
Tell us your building size, your forklifts and what you store. We’ll come out, measure up and send you a real layout.
Success Storage Solutions · 5900 Mavis Road, Suite 1010, Mississauga, ON L5V 2P5 · Serving Brampton and Peel Region · Contact us