Toronto · GTA
New and used pallet racking for Toronto warehouses, installed in phases and signed off before the first pallet goes up.
Pallet racking Toronto
Success Storage Solutions is a warehouse racking supplier serving Toronto and the GTA from our office on Mavis Road in Mississauga. We supply new and used pallet racking made in Ontario, with installation by our sister company, Success Installations. We also handle rack inspection, repairs, PSR sign-off, relocation and buy-back for Toronto warehouses.
Every Toronto project starts with a walk through your building. We measure it and tell you what it can actually hold, whether that’s a new fit-out, more pallet positions or a damaged row that needs signing off again.
20+
years, racking only
10M+
sq ft supplied
New & Used
racking, plus buy-back
Made in Ontario
in Whitby and Colborne
Racking services
One team handles your racking from the first measurement to the paperwork that makes it legal to load.
The floor is marked from engineered drawings, frames are raised and braced, beams are set to their elevations and tightened, then the system is anchored to the slab. Installation is carried out by our sister company, Success Installations, in phases with barricaded work zones, so a new racking installation in Toronto doesn’t mean shutting down. We supply the engineer-stamped drawings and handle the municipal permit process.
A walkthrough of every upright, beam and safety pin, a damage report flagging compromised steel, repair with engineered parts, and PSR sign-off with rated capacity signs. Most standard facilities are inspected in a single day. For racking repair in Toronto, we source replacement uprights, beams and bracing for the major racking brands.
Moving between Toronto buildings, consolidating sites or handing back a lease? We survey and label every component, take it down in phases so you keep shipping, and rebuild to the engineered spec.
We measure clear height, columns, sprinklers and loading doors, then lay the racking out around how your product moves. The site assessment is free and comes with CAD drawings and engineer-stamped plans.
Racking systems
From industrial pallet racking for a new Toronto distribution centre to pallet racks, mezzanines and shelving for an existing building, the right system depends on how many SKUs you carry and how fast they move. Every system below is part of our twelve racking systems.
We supply new racking made in Ontario and used racking where it fits the job. Used selective racking works when the frames and beams match, the components are compatible, and the finished system can still be certified. We quote new and used side by side. Clearing out surplus racking? We assess it and make you a buy-back offer.
Selective pallet racking: direct access to every pallet, for operations with many SKUs.
Push back racking: two to six pallets deep from a single aisle.
Drive-in racking: forklifts drive into the lane, for high volumes of few SKUs.
Double deep racking: two pallets deep, fewer aisles.
Pallet flow and carton flow: gravity-fed first in, first out.
Cantilever racking: pipe, lumber, steel and sheet goods.
Mezzanine floors: a second level inside the building you already rent.
Industrial shelving: hand-loaded storage for small parts and spares.
Pick modules and rack protection for high-throughput picking and forklift traffic.
Not sure which fits? Our guide to warehouse racking types compares them, or book a free site assessment and we’ll tell you.
Why us
We are not a general contractor who also sells shelving. Warehouse racking has been the whole business for over twenty years, with racking supplied to operations including Ford, Loblaws, Wayfair and Gay Lea.
As an executive partner of North American Steel, our racking is made at their plants in Whitby and Colborne. Toronto warehouses deal direct with the supplier, not an importer or a reseller.
Engineer drawings, capacity planning and rated capacity signage come with the job, and the PSR is done before the racking is loaded where one applies.
We tell you what your building can actually hold. Sometimes the honest answer is a smaller job than you expected. About us
Areas served
We are based in Mississauga and on site quickly across the GTA. In Toronto, that includes warehouses and distribution centres in:
Across the GTA, we supply pallet racking to Mississauga, Brampton, Vaughan, Markham, Richmond Hill, Oakville, Pickering and Ajax, and throughout Ontario.
How a project runs
01
A free walk-through of your Toronto building: clear height, columns, sprinklers and doors.
02
CAD layouts and capacity planning around how your product moves.
03
A real quote, usually within one business day of your enquiry, with new and used options where they fit.
04
Ontario-made racking, installed in phases by Success Installations.
05
Engineer documents, PSR where it applies, and rated capacity signage before loading.
FAQ
After any forklift strike, repair, beam-level change or relocation, because each one affects rated capacity. Many facilities also book a professional inspection once a year.
A PSR is an Ontario engineering review that confirms racking is safe before it is loaded. It applies to new installations, system modifications such as beam changes or relocation, and repairs.
The floor is marked from engineered drawings, frames are raised and braced, beams are set and tightened, and the system is anchored to the slab. Capacity signs and the PSR, where required, come before loading.
Survey and label every frame and beam first, then take the system down in phases, because rushed teardowns bend frames. We transport, store and rebuild it to the engineered spec.
We do. We offer buy-back on surplus racking from relocations, consolidations and lease-end clearances, after assessing what you have.
Free site assessment
Send us your building size, what you store and what isn’t working. We’ll come out, measure up and send you a real layout.
Success Storage Solutions · 5900 Mavis Road, Suite 1010, Mississauga, ON L5V 2P5 · Serving Toronto and the GTA · Contact us