Selective Pallet Racking
Selective racking gives direct access to every pallet without moving another. It is the default choice when you carry many different SKUs. See selective pallet racking, or compare it in Selective vs. Drive-In Pallet Racking.
Racking your warehouse can load with confidence, designed from our office on Mavis Road, made in Ontario, and signed off before your first pallet goes up.
Success Storage Solutions supplies pallet racking in Mississauga from our office at 5900 Mavis Road. We design and supply selective, push back, cantilever and drive-in racking, steel mezzanines and industrial shelving. Installation is handled by our sister company, Success Installations, and we cover inspection, repair, PSR and relocation work across the city.
Racking is all we do, and it has been for over twenty years. Every project starts the same way: we walk your floor, measure the building, and tell you what it can actually hold. Sometimes the honest answer is a smaller job than you expected.
Racking from us is working in operations for




Start with the problem, not the product. Running out of space, picking too slowly and awkward or dated stock each point to a different system. We lay the racking out around how your product actually moves, not around a catalogue page. Every system is part of our twelve racking systems, new and used.
Selective racking gives direct access to every pallet without moving another. It is the default choice when you carry many different SKUs. See selective pallet racking, or compare it in Selective vs. Drive-In Pallet Racking.
Pallets sit on inclined carts, two to six deep, loaded and picked from a single aisle. You get density without giving up selectivity, which helps when floor space is the constraint. More on push back racking and when it makes sense.
Cantilever arms have no front column, so nothing gets in the way of long loads. It is built for pipe, lumber, steel and sheet goods. See cantilever racking and our guide to storing long and bulky stock.
A mezzanine is a free-standing steel structure on its own columns, built inside the building you already rent. It often doubles usable space without moving or extending. As a steel mezzanine provider, we supply engineer-stamped drawings for the building permit and the PSR where required. See mezzanine floors and how to maximize warehouse space.
Not sure which fits? Start with our guide to warehouse racking types.
We are based locally, so a site visit is a short drive, not a booking weeks out. One team coordinates the racking from the first measurement to the paperwork that makes it legal to load.
We measure clear height, columns, sprinkler lines and loading doors, then lay the racking out around how your product moves. You get CAD drawings, capacity planning and engineer-stamped plans ready for City of Mississauga permits.
Installation is carried out by our sister company, Success Installations, who build everything we supply. Deliveries are phased around your operation so receiving and shipping keep running.
A single forklift strike to an upright can cut the safe capacity of an entire row, and it rarely gets reported. We inspect frame by frame, replace damaged components, and issue the Pre-Start Health and Safety Review and rated capacity signage.
Moving buildings within the city or out to a new site? We label, dismantle, transport and rebuild in phases so you keep shipping, and buy back the racking you no longer need.
Our office is at 5900 Mavis Road, so we are on site quickly anywhere in Mississauga. You deal with the people who designed your layout, from the first visit to sign-off.
As an executive partner of North American Steel, your racking is made at their plants in Whitby and Colborne, Ontario. You deal direct with the people who make it, not an importer or a reseller.
Engineer drawings, capacity planning and rated capacity signage come with the job. Where a PSR applies, we arrange it before the racking is loaded.
We tell you what your building can actually hold, and what it can't. Racking from us is already working in operations for Ford, Loblaws, Wayfair and Gay Lea. More about us
We supply and service warehouses across the city, including:
Facilities along Highways 401, 403, 407, 410 and 427 are all within easy reach. We also work across Peel Region and the GTA, including Brampton, Toronto and Milton.
Five stages from your first message to racking you can load. No surprises, and no invoices for work nobody discussed.
Pallet racking is a steel system of upright frames and beams that stores palletized goods in rows and levels, loaded by forklift. It turns the height of your building into usable storage.
Selective racking gives direct forklift access to every pallet without moving another. It is the default choice for warehouses that carry many different SKUs.
Pallets sit on inclined carts, two to six deep, and are loaded and picked from one aisle. A new pallet pushes the others back, and they roll forward as the front one is picked.
Cantilever racking uses arms that extend from a central column, with no front column in the way. It stores long or awkward loads such as pipe, lumber, steel and sheet goods.
It depends on beam length and profile, frame height and the spacing between beam levels. Every bay should carry rated capacity signage, which we include with the job.
Tell us your building size and what you store. We'll come out, measure up and send you a real layout.
Success Storage Solutions 5900 Mavis Road, Suite 1010, Mississauga, ON L5V 2P5 (647) 766-3512 Contact us